Portable Multi-Function Radio
2000mAh Solar Phone USB Charging
FM AM NOAA Weather Radio Emergency Portable Indoor LED Power Station
【Product Features】:
1. Press the auto alarm button and your home computer will automatically detect all times and temperatures
2. Multi-function: weather radar, 3 LED indicators,
3. Three charging methods: USB, solar, manual charging.
4. Rechargeable radio is always available! The powerful 2000mAh battery can be charged via USB cable, solar panel or charger for emergency.
5. Very compact, equipped with 1W LED light, durable and powerful, can be used for camping, hiking, trekking or other outdoor activities
6. The 2000mAh model is equipped with a new battery indicator, you can immediately identify the battery status
Maximum power consumption: 0.5W
Frequency range: AM: 520~1710kHz FM: 87~108MHz NOAA: 162.450~162.550MHZ
Voltage capacity: 2.7V~4.2V
Power supply: 2000mAh lithium-ion battery.
LED: 3 high-brightness white LEDs
External power supply setting solar light USB DC5V charging, connected to the display via USB cable
Dimensions: 130X60X40 (MM)
Weight: about 226g
Use volume button: Turn on the volume button on the timeline to illuminate the radio and control the volume.
Use the radio band to select AM, FM or WB. For better reception, turn on the radio antenna, press the tuner dial to select the station, and the green melody indicator lights up when the selected station is fully listened.
Use the storage light: Click the storage light switch to turn on, press the pause button on the light to turn off the indicator.
【Solar/Manual/USB Power】:
1.Solar: Place the product in the sun for about 10 to 12 hours, and the red power indicator will light up when charging.
2.Manual operation: Restart the machine. When using for the first time or the device has been idle for more than 60 days, turn the hour or minute hand of the clock for 3 to 5 minutes to activate the built-in battery.
The red indicator light will light up when you are disconnected from the power and charge again. Rotate the light for 2-3 minutes (rotation speed>=130rmp) to get: three LED lights flashing continuously for 15-20 minutes; continuous use of the radio for 15 to 20 minutes (medium volume); talk time 3 to 5 minutes
3. USB charging port: Connect the other end of the charging cable to the Micro SD card and the other end of the USB cable to the USB port of the mobile hard drive.
【Charging Protection】:
The red LED indicator lights up when the battery is fully charged, and the over-discharge protection is completely turned off when the battery voltage is lower than 2.5V, and the power is automatically cut off.
【Note】:
When the watch stops running for more than 60 days or when used for the first time.
Please place the phone or charger in the sun for 3-5 minutes to activate the battery inside.
1. You can manually measure its battery using different medical methods and tools.
2.Due to differences in shooting light, angle, display screen, etc., the picture may not reflect the actual color of the object.
